Details

---

BUY G2R-1-24VDC 24V 10A 5PINS https://www.utsource.net/itm/p/12604833.html

Parameter	Value
Part Number	G2R-1-24VDC
Voltage Rating	24V DC
Current Rating	10A
Pin Configuration	5 Pins
Operating Temperature	-40掳C to +85掳C
Relay Type	SPDT (Single Pole, Double Throw)
Coil Resistance	120惟
Insulation Resistance	>100M惟 at 500VDC
Contact Material	Silver Alloy
Maximum Switching Capacity	10A at 24VDC

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat and stable surface.
   • Connect the coil terminals to the control circuit using wires suitable for the voltage and current ratings.

2. Wiring:

   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to your application needs.
   • The pin configuration should follow the datasheet diagram for correct wiring.

3. Operation:

   • Apply the rated voltage to the coil terminals to activate the relay.
   • Ensure that the load connected to the relay does not exceed the maximum switching capacity.

4. Maintenance:

   • Periodically inspect the relay for any signs of wear or damage.
   • Clean the relay as necessary with a soft cloth; avoid using solvents or abrasive materials.

5. Safety Precautions:

   • Always disconnect power before performing any maintenance or installation.
   • Do not exceed the specified electrical ratings to prevent damage or failure.
   • Ensure proper ventilation around the relay to dissipate heat effectively.

(For reference only)