Details

---

BUY G5V-2-24VDC 24V 2A 8PINS https://www.utsource.net/itm/p/12604907.html

Parameter	Value	Description
Type	G5V-2-24VDC	Relay model
Coil Voltage	24V DC	Operating voltage of the relay coil
Current Rating	2A	Maximum current rating for contacts
Pin Configuration	8PINS	Number and configuration of pins
Contact Form	SPDT	Single Pole Double Throw
Coil Resistance	120惟	Resistance of the relay coil
Operating Temp.	-25掳C to +70掳C	Temperature range for reliable operation
Insulation Resistance	>100M惟 at 500VDC	Electrical resistance between insulated parts
Dielectric Strength	1500VAC for 1min	Voltage withstand capability

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Connect the 24V DC power supply to the coil terminals as specified in the pin configuration.

2. Wiring:

   • Wire the load to the common (COM) and normally open (NO) or normally closed (NC) contacts based on the application requirements.
   • Verify all connections are secure and correct before applying power.

3. Operation:

   • When the coil is energized, the common contact will switch from the NC position to the NO position.
   • Ensure the current through the contacts does not exceed 2A to prevent damage.

4. Maintenance:

   • Periodically check connections for corrosion or looseness.
   • Operate within specified temperature ranges to avoid malfunction.

5. Safety Precautions:

   • Disconnect power before making any adjustments or repairs.
   • Use appropriate personal protective equipment when handling electrical components.

(For reference only)