Details

---

BUY TRG1D-12V-S-H replace JZC-32F-012-HS3 12V 5A 4PINS https://www.utsource.net/itm/p/12604908.html

Parameter	TRG1D-12V-S-H	JZC-32F-012-HS3
Voltage Rating	12V	12V
Current Rating	5A	5A
Pin Configuration	4 Pins	4 Pins
Coil Resistance	Refer to Datasheet	Refer to Datasheet
Operating Temperature	Refer to Datasheet	Refer to Datasheet
Insulation Resistance	Refer to Datasheet	Refer to Datasheet
Contact Material	Refer to Datasheet	Refer to Datasheet
Mounting Type	Through-hole/Surface mount (Check spec)	Through-hole
Actuation Method	Electromagnetic	Electromagnetic

Instructions for Replacement:

1. Verify Compatibility:

   • Ensure that the voltage and current ratings of the TRG1D-12V-S-H match those of the JZC-32F-012-HS3.
   • Confirm that the pin configuration is compatible with your existing circuit board.

2. Power Off:

   • Before replacing, disconnect power to avoid electrical shock or damage to components.

3. Remove Old Relay:

   • Carefully desolder or unclip the JZC-32F-012-HS3 from the PCB, ensuring not to damage surrounding components.

4. Install New Relay:

   • Insert the TRG1D-12V-S-H into the PCB, aligning pins correctly.
   • Solder or clip in place as per the mounting type specified in the datasheet.

5. Reconnect Power and Test:

   • Reconnect power and test the circuit to ensure the relay operates correctly.
   • Check for any unusual behavior or smells indicating potential issues.

6. Refer to Datasheets:

   • For detailed specifications and additional instructions, refer to the respective datasheets of both relays.

(For reference only)