Details

---

BUY OZ-SH-112LM1 replace G2R-1-E-12VDC 12V 16A 8PINS https://www.utsource.net/itm/p/12604917.html

Parameter	OZ-SH-112LM1 (Replaces G2R-1-E-12VDC)
Voltage Rating	12V DC
Current Rating	16A
Number of Pins	8 pins
Operating Temperature	-40掳C to +85掳C
Coil Resistance	150惟 卤 10%
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	1500V AC for 1 minute
Contact Form	SPDT
Electrical Life	100,000 operations
Mechanical Life	10 million operations
Terminal Type	Solder Lug
Mounting	PCB mount

Instructions:

1. Installation: Ensure the relay is mounted on a suitable printed circuit board (PCB) with appropriate clearance to prevent short circuits.
2. Wiring: Connect the control voltage to the coil terminals and the load circuit to the contact terminals as per the pin configuration diagram.
3. Operation: Apply the rated voltage to the coil to energize the relay. This will switch the contacts to the desired state (normally open to closed or vice versa).
4. Maintenance: Regularly inspect connections for tightness and signs of wear. Ensure the operating environment does not exceed the specified temperature range.
5. Safety: Do not exceed the rated voltage and current limits. Use appropriate protective equipment when handling electrical components.

(For reference only)