Details

---

BUY KSD-01F D60 60掳C Normally Close Temperature Control Switch Thermostats https://www.utsource.net/itm/p/12604918.html

Parameter	Description
Model	KSD-01F D60
Type	Normally Closed (NC) Temperature Control Switch
Temperature Rating	60掳C
Contact Form	SPST-NC (Single Pole Single Throw - Normally Closed)
Operating Temperature	60掳C 卤 5掳C
Differential Temperature	5掳C - 15掳C
Electrical Rating	125VAC / 16A, 250VAC / 10A
Insulation Resistance	> 100M惟 at 500VDC
Dielectric Strength	2000VAC for 1 minute
Contact Resistance	< 50m惟
Life Expectancy	10,000 cycles (min)
Operating Humidity	95% RH (max)
Mounting Position	Any position
Dimensions	14mm (Diameter) x 19.5mm (Height)
Weight	3g
Material	Housing: Phenolic resin, Contacts: Silver alloy
Certifications	UL, CSA, VDE, CQC

Instructions for Use

1. Installation:

   • Ensure the thermostat is installed in a location where it can accurately sense the temperature of the environment or device it is controlling.
   • Mount the thermostat securely to avoid movement or vibration that could affect its performance.

2. Wiring:

   • Connect the normally closed (NC) contacts to the load and power source.
   • Ensure all connections are tight and secure to prevent arcing or overheating.

3. Operation:

   • The switch will remain closed until the temperature reaches 60掳C.
   • At 60掳C, the switch will open, breaking the circuit.
   • The switch will reset when the temperature drops below the differential range (5掳C - 15掳C below 60掳C).

4. Maintenance:

   • Regularly inspect the thermostat for signs of wear or damage.
   • Clean the thermostat with a dry cloth to remove dust and debris.
   • Do not use solvents or abrasive materials as they may damage the housing or contacts.

5. Storage:

   • Store the thermostat in a cool, dry place away from direct sunlight and extreme temperatures.
   • Avoid storing the thermostat in environments with high humidity or corrosive gases.

6. Safety:

   • Always disconnect the power before installing or servicing the thermostat.
   • Do not exceed the electrical ratings specified for the thermostat.
   • Replace the thermostat if it shows signs of malfunction or damage.

(For reference only)