Details

---

BUY KSD9700 B60 60掳C Normally Close Metal shell Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12604920.html

Parameter	Value
Model	KSD9700 B60
Type	Temperature Control Switch
Switch Type	Normally Closed (NC)
Temperature Rating	60掳C
Case Material	Metal Shell
Contact Material	Silver Alloy
Rated Voltage	250VAC
Rated Current	10A
Max. Switching Power	2500W (250VAC x 10A)
Operating Temperature	-30掳C to 125掳C
Hysteresis	卤5掳C
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	1500VAC for 1 minute
Life Cycle	10,000 cycles
Mounting Method	Screw Terminal
Dimensions	12mm (Diameter) x 18mm (Height)
Weight	5g
Package Quantity	5 pcs

Instructions for Use:

1. Preparation:

   • Ensure that the device is powered off before installation.
   • Verify that the temperature control switch is suitable for your application by checking the rated voltage, current, and temperature.

2. Installation:

   • Mount the KSD9700 B60 switch in the desired location using the provided mounting method.
   • Connect the wires to the screw terminals, ensuring a secure connection.
   • Tighten the screws to prevent any loose connections.

3. Operation:

   • Power on the device.
   • The switch will close when the temperature drops below 60掳C and open when the temperature rises above 60掳C, with a hysteresis of 卤5掳C.

4. Maintenance:

   • Regularly inspect the switch for any signs of wear or damage.
   • Clean the switch with a dry cloth if necessary, but avoid using water or solvents.
   • Replace the switch if it shows signs of malfunction or if it has reached its life cycle limit.

5. Safety Precautions:

   • Do not exceed the rated voltage and current to prevent damage or fire.
   • Do not install the switch in environments with high humidity, corrosive gases, or flammable materials.
   • Ensure proper ventilation around the switch to prevent overheating.
   • Always follow local electrical codes and regulations.

6. Storage:

   • Store the switch in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the switch in its original packaging until ready for use to protect it from dust and damage.

(For reference only)