Details

---

BUY SRD-03VDC-SL-C SRD-3VDC-SL-C 3V 10A 5PINS https://www.utsource.net/itm/p/12604946.html

Parameter	Value	Description
Model Number	SRD-03VDC-SL-C	Relay model
Coil Voltage	3V DC	Operating voltage of the relay coil
Maximum Switching Current	10A	Maximum current through contacts
Contact Form	SPDT	Single Pole Double Throw
Number of Pins	5	Total number of pins
Operating Temperature	-40掳C to 85掳C	Temperature range for operation
Insulation Resistance	>100M惟	Electrical resistance between parts
Dielectric Strength	2500V AC RMS	Voltage withstand capability
Mechanical Life	10 million ops	Number of operations before failure
Electrical Life	100,000 ops	Number of electrical operations

Instructions:

1. Installation:

   • Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical shock.
   • Connect the relay coil terminals to the control circuit using wires suitable for the voltage and current.

2. Connection:

   • Connect the common (COM) terminal to the load.
   • Connect the normally open (NO) or normally closed (NC) terminals as per the application requirement.
   • Ensure all connections are secure and insulated properly to prevent short circuits.

3. Operation:

   • Apply the rated coil voltage to energize the relay. This will switch the contacts from their normal position to the activated position.
   • When the coil voltage is removed, the relay returns to its default state.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Keep the relay clean and free from dust and debris which can affect performance.

5. Caution:

   • Do not exceed the maximum switching current to avoid damaging the relay contacts.
   • Ensure the relay is used within the specified temperature range to ensure reliable operation.

(For reference only)