Details

---

BUY S30VTA160 https://www.utsource.net/itm/p/12604947.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Current (Max)	Iop	-	-	20	mA
Output Voltage (High)	VOH	-	80% Vcc	-	V
Output Voltage (Low)	VOL	-	0.4	-	V
Input Voltage (High)	VIH	-	70% Vcc	-	V
Input Voltage (Low)	VIL	-	0.8	-	V
Power Dissipation	PD	-	-	100	mW
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-55	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Do not exceed the maximum operating current of 20mA.

2. Input Signals:

   • For a high input signal, the voltage should be at least 70% of Vcc.
   • For a low input signal, the voltage should be no more than 0.8V.

3. Output Signals:

   • The output voltage in the high state will be approximately 80% of Vcc.
   • The output voltage in the low state will be around 0.4V.

4. Thermal Management:

   • The device can operate within a temperature range of -40掳C to 85掳C.
   • Store the device between -55掳C and 125掳C.

5. Power Dissipation:

   • The maximum power dissipation is 100mW. Ensure proper heat sinking if operating near this limit.

6. Handling:

   • Handle with care to avoid static damage.
   • Follow standard ESD precautions during handling and installation.

7. Mounting:

   • Ensure proper soldering and mounting to maintain electrical and mechanical integrity.
   • Use recommended PCB layout guidelines for optimal performance.

8. Testing:

   • Test the device under specified conditions to ensure it meets the required parameters.
   • Refer to the datasheet for detailed test procedures and conditions.

(For reference only)