Details

---

BUY (20pcs) DIP Metal Film Resistor 1% 3W 0.15惟(0.15R) https://www.utsource.net/itm/p/12604967.html

Parameter	Value
Resistance	0.15惟 (0.15R)
Tolerance	卤1%
Power Rating	3W
Package Type	DIP
Operating Temperature	-55掳C to +125掳C
Operating Voltage	50V
Temperature Coefficient	100 ppm/掳C
Insulation Resistance	>1000M惟
Soldering Temperature	260掳C for 10s
Storage Temperature	-55掳C to +150掳C

Instructions:

1. Handling:

   • Handle with care to avoid physical damage.
   • Do not expose to excessive moisture or corrosive environments.

2. Mounting:

   • Ensure the resistor is securely mounted on the PCB.
   • Use appropriate soldering techniques to avoid overheating.
   • Allow sufficient space around the resistor for heat dissipation.

3. Soldering:

   • Preheat the PCB if necessary to reduce thermal shock.
   • Apply solder within the recommended temperature range (260掳C for 10 seconds).
   • Avoid prolonged heating which can damage the resistor.

4. Testing:

   • Measure resistance using a multimeter to ensure it meets the specified tolerance.
   • Check for proper electrical connections and insulation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static and environmental factors.

6. Disposal:

   • Follow local regulations for disposing of electronic components.
   • Recycle where possible to minimize environmental impact.

(For reference only)