Details

---

BUY G4A-1A-E-24VDC replace G4A-1A-E-DC24V 24V 20A 4PINS https://www.utsource.net/itm/p/12604987.html

Parameter	Description
Part Number	G4A-1A-E-24VDC
Replacement For	G4A-1A-E-DC24V
Voltage	24V DC
Current Rating	20A
Pin Configuration	4 Pins
Type	Relay
Coil Voltage	24V DC
Contact Form	SPDT (Single Pole Double Throw)
Insulation	Reinforced insulation
Operating Temp.	-40掳C to +85掳C
Storage Temp.	-40掳C to +85掳C
Terminal Type	Quick connect terminals
Mounting	Panel mount

Instructions for Use:

1. Installation Preparation:

   • Ensure the power supply is turned off before installing or replacing the relay.
   • Verify that the voltage and current ratings of the relay match the requirements of your application.

2. Mounting:

   • Secure the relay in place using the provided panel mount hardware.
   • Ensure the mounting surface is clean, dry, and free from conductive materials.

3. Wiring:

   • Connect the coil terminals to the control circuit using appropriate gauge wire.
   • Connect the load to the common and normally open or normally closed contacts as required by your application.
   • Ensure all connections are tight and secure to prevent loose wires causing shorts or poor connections.

4. Testing:

   • After wiring, carefully inspect all connections for correct installation.
   • Turn on the power supply and test the operation of the relay to ensure it functions correctly under load.

5. Maintenance:

   • Periodically check the relay for signs of wear or damage.
   • Keep the relay and surrounding area clean and free from debris that could interfere with its operation.

(For reference only)