Details

---

BUY KSD301 B125 125掳C Normally Close Jump type Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12604988.html

Parameter	Value
Type	Temperature Control Switch
Model	KSD301 B125
Operating Temperature	125掳C
Contact Type	Normally Closed (NC)
Action Type	Jump Type
Contact Rating	16A, 250VAC / 10A, 125VDC
Differential Temperature	5-15掳C
Mounting Method	Snap Action, Surface Mount
Terminal Type	Quick Connect (2.8mm)
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	1500VAC for 1 minute
Mechanical Life	10,000 cycles
Electrical Life	5,000 cycles
Weight	4g
Dimensions	10.2mm x 10.2mm x 9.5mm
Operating Humidity	5% to 95% RH (non-condensing)
Storage Temperature	-40掳C to 150掳C
Packaging	5pcs per pack

Instructions

1. Installation:

   • Ensure the thermostat is installed in a location where it can accurately sense the temperature of the device or environment.
   • Use the quick connect terminals to secure the wires. Ensure a firm connection to avoid any loose connections.

2. Mounting:

   • The KSD301 B125 can be surface mounted. Ensure the mounting surface is clean and flat.
   • Use appropriate mounting hardware to secure the thermostat in place.

3. Wiring:

   • Connect the normally closed (NC) contacts to the circuit you want to control.
   • When the temperature reaches 125掳C, the switch will open, breaking the circuit.
   • As the temperature drops, the switch will reset and close the circuit within a differential range of 5-15掳C.

4. Testing:

   • Before final installation, test the thermostat to ensure it operates correctly.
   • Apply a controlled heat source to the thermostat and verify that the switch opens at 125掳C and closes as the temperature decreases.

5. Maintenance:

   • Regularly inspect the thermostat for signs of wear or damage.
   • Clean the thermostat with a soft, dry cloth to remove dust and debris.

6. Safety:

   • Do not exceed the maximum operating temperature of 125掳C.
   • Ensure the electrical connections are rated for the current and voltage specified.
   • Do not use the thermostat in environments with explosive gases or flammable materials.

7. Storage:

   • Store the thermostats in a dry, cool place away from direct sunlight and extreme temperatures.
   • Keep the thermostats in their original packaging until ready for use.

8. Disposal:

   • Dispose of the thermostat in accordance with local environmental regulations.

(For reference only)