Details

---

BUY G5Q-1-DC24V G5Q-1-24VDC 24V 10A 5PINS https://www.utsource.net/itm/p/12605005.html

Parameter	Specification
Type	Relay
Model	G5Q-1-DC24V / G5Q-1-24VDC
Coil Voltage	24V DC
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A
Number of Pins	5
Insulation Resistance	100M惟 or more at 500VDC
Dielectric Strength	1000VAC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Coil Power Consumption	1.2W
Coil Resistance	1970惟 卤 10%
Weight	Approx. 30g

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area.
   • Mount the relay on a flat surface using appropriate mounting hardware.

2. Electrical Connection:

   • Connect the coil terminals to a 24V DC power supply.
   • Connect the load to the common and normally open/closed contacts as per your application requirement.

3. Operation:

   • When voltage is applied to the coil, the relay will energize, switching the contacts from their resting state to the active state.
   • Ensure the load current does not exceed 10A to prevent damage to the relay contacts.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Keep the relay clean and free from debris to ensure optimal performance.

5. Safety Precautions:

   • Do not exceed the rated voltage or current.
   • Avoid exposing the relay to environments with excessive moisture, dust, or corrosive gases.
   • Always disconnect power before performing any maintenance or installation procedures.

(For reference only)