Details

---

BUY CHIP resistance 2512F0R MARKING 0R https://www.utsource.net/itm/p/12605055.html

Parameter	Value
Part Number	2512F0R
Marking	0R
Resistance	0 惟
Tolerance	卤5%
Power Rating	1 W
Operating Voltage	50 VDC
Operating Temperature	-55掳C to +125掳C
Case Size	2512 (6.35 x 6.35 mm)
Termination	SMD (Surface Mount)
Compliance	RoHS Compliant

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat the board to 100掳C to 120掳C before soldering.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should be kept within 10 seconds per joint.

3. Mounting:

   • Ensure the component is placed correctly on the PCB according to the marking.
   • Use a reflow soldering process or manual soldering with a fine-tipped iron.

4. Inspection:

   • Visually inspect the solder joints for proper wetting and absence of bridges or voids.
   • Use a multimeter to verify the resistance value if necessary.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to maintain ESD protection.

6. Environmental Considerations:

   • Dispose of the component according to local environmental regulations.
   • Recycle when possible.

(For reference only)