Details

---

BUY H2AK024T https://www.utsource.net/itm/p/12605058.html

Parameter	Description	Value
Part Number	Unique identifier for the component	H2AK024T
Type	Category of the component	Relay
Coil Voltage	Voltage required to activate the relay	24V DC
Coil Power Consumption	Power consumed by the coil when activated	180mW
Contact Form	Configuration of the relay contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Insulation Resistance	Resistance between contacts and coil	>100M惟 at 500V DC
Dielectric Strength	Voltage the insulation can withstand without breaking down	2000V AC for 1 minute
Operating Temperature	Range of temperatures the relay can operate in	-40掳C to +85掳C
Storage Temperature	Range of temperatures the relay can be stored in	-40掳C to +125掳C
Mechanical Life	Number of operations before mechanical failure	10 million cycles
Electrical Life	Number of operations before electrical failure under rated load	100,000 cycles
Mounting Position	Orientation for proper operation	Any position
Weight	Mass of the component	25g

Instructions:

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay securely to prevent vibration and mechanical stress.
   • Follow the recommended PCB layout and soldering guidelines provided by the manufacturer.

2. Coil Connection:

   • Connect the coil terminals to the appropriate power supply.
   • Use a flyback diode across the coil to protect against voltage spikes during de-energization.

3. Contact Connection:

   • Connect the load to the normally open (NO) and common (COM) terminals for normally open operation.
   • Connect the load to the normally closed (NC) and common (COM) terminals for normally closed operation.

4. Operation:

   • Apply the rated coil voltage to energize the relay.
   • The contacts will switch according to the contact form (SPDT).
   • Ensure the load does not exceed the contact rating to avoid damage.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth to remove dust and debris.
   • Do not use abrasive materials or solvents that could damage the relay.

6. Storage:

   • Store the relay in a cool, dry place away from direct sunlight and corrosive substances.
   • Avoid extreme temperatures and humidity to prevent degradation.

7. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.
   • Recycle components where possible.

(For reference only)