Details

---

BUY G2R-1-E-24VDC https://www.utsource.net/itm/p/12605070.html

Parameter	Description
Part Number	G2R-1-E-24VDC
Type	Relay Module
Input Voltage	24V DC
Number of Channels	1 Channel
Load Voltage	250V AC / 30V DC (Max)
Load Current	10A (Resistive Load)
Contact Form	SPDT (Single Pole Double Throw)
Switching Power	300VA / 360W (Max)
Coil Resistance	120惟 (Nominal)
Operating Temperature	-25掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Relative Humidity	5% to 95% (Non-condensing)
Insulation Resistance	>100M惟 at 500V DC
Dielectric Strength	2500V AC for 1 minute
Contact Material	Silver Alloy
Mechanical Life	10 million operations (Min)
Electrical Life	100,000 operations (Min)
Dimensions	35mm x 15mm x 11mm
Weight	15g

Instructions

1. Installation:

   • Ensure the relay module is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a DIN rail or a suitable mounting surface.

2. Connection:

   • Connect the 24V DC power supply to the input terminals (L+ and L-).
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) terminals as required.

3. Operation:

   • When the input voltage is applied, the relay coil energizes, causing the contacts to switch from NC to NO.
   • When the input voltage is removed, the contacts return to their default position (NC).

4. Safety Precautions:

   • Do not exceed the maximum load voltage and current ratings.
   • Ensure all connections are secure and properly insulated.
   • Avoid operating the relay in environments with high humidity or corrosive gases.
   • Use appropriate fuses or circuit breakers to protect against overcurrent conditions.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry, lint-free cloth if necessary.
   • Replace the relay if it fails to operate correctly or shows signs of damage.

(For reference only)