Details

---

BUY CHW-V-112DA2 REPLACE SRD-S-112DM 12V 10A 4PINS https://www.utsource.net/itm/p/12605109.html

Parameter	Value
Part Number	CHW-V-112DA2
Replaces	SRD-S-112DM
Voltage	12V
Current Rating	10A
Pin Configuration	4 Pins

Instructions:

1. Verify Compatibility: Ensure that the CHW-V-112DA2 is compatible with your application by matching the voltage and current ratings.
2. Installation:
   • Disconnect power to the device before installation.
   • Locate the existing SRD-S-112DM relay.
   • Carefully remove the old relay, noting the orientation of the pins.
3. Replacement:
   • Insert the CHW-V-112DA2 into the socket or circuit board in the same orientation as the removed relay.
   • Securely connect all wires or pins ensuring they match the correct terminals.
4. Testing:
   • Reconnect the power and test the operation of the device to ensure the relay is functioning correctly.
5. Safety Checks:
   • Check for any unusual heat generation or noise from the relay during operation.
   • If issues arise, disconnect power immediately and recheck connections or consider professional assistance.

Note: Always refer to the specific safety guidelines provided by the manufacturer and adhere to local electrical codes and regulations.

(For reference only)