Details

---

BUY G8N-17HR-12VDC https://www.utsource.net/itm/p/12605113.html

Parameter	Value
Type	Relay
Model	G8N-17HR-12VDC
Coil Voltage	12V DC
Coil Power Consumption	1.2W (max)
Coil Resistance	100惟 (nominal)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A at 250V AC
Contact Material	AgSnO2
Insulation Resistance	100M惟 (min)
Dielectric Strength	1500V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +85掳C
Vibration Resistance	10 to 55Hz, 2G
Shock Resistance	50G (half sine wave)

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface using the provided mounting holes.

2. Coil Connection:

   • Connect the coil terminals to a 12V DC power supply.
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
   • Ensure the load current does not exceed the contact rating of 10A at 250V AC.

4. Operation:

   • When the coil is energized, the normally open (NO) contact will close, and the normally closed (NC) contact will open.
   • When the coil is de-energized, the contacts will return to their default positions.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and extreme temperatures.

7. Safety:

   • Always disconnect the power supply before performing any maintenance or installation.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)