Details

---

BUY (20pcs) DIP Metal Film Resistor 1% 1/2W 0.1惟(0.1R) https://www.utsource.net/itm/p/12605127.html

Parameter	Value
Package Quantity	20 pcs
Type	Metal Film
Tolerance	1%
Power Rating	1/2W (0.5W)
Resistance	0.1惟 (0.1R)
Package Style	DIP (Dual In-line Package)
Operating Temperature	-55掳C to +125掳C
Maximum Voltage	250V
Temperature Coefficient	卤100 ppm/掳C

Instructions:

1. Handling:

   • Handle with care to avoid damage.
   • Avoid exposure to high humidity and corrosive environments.

2. Installation:

   • Ensure the resistor is placed correctly on the PCB or breadboard.
   • Soldering should be done quickly to prevent overheating.
   • Use a soldering iron with a temperature setting of 350掳C to 400掳C.

3. Mounting:

   • For optimal heat dissipation, ensure the resistor is mounted with adequate space from other components.
   • Do not bend the leads excessively as this can cause mechanical stress.

4. Testing:

   • Use a multimeter to verify the resistance value before installation.
   • Check for continuity and correct resistance value after installation.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect from static and physical damage.

6. Safety:

   • Always disconnect power before handling or testing components.
   • Follow all local safety regulations and guidelines.

(For reference only)