Details

---

BUY DP83223V https://www.utsource.net/itm/p/12605130.html

Parameter	Description	Value	Unit
Supply Voltage (VDD)	Operating supply voltage range	1.65 to 3.6	V
Output Data Rate	Maximum output data rate	1000	Mbps
Input Common-Mode Voltage Range	Range of input common-mode voltage	0.4 to 2.4	V
Differential Input Voltage Range	Range of differential input voltage	卤0.5	V
Output Differential Swing	Differential output swing	400 to 1200	mV
Output Common-Mode Voltage	Output common-mode voltage range	0.9 to 2.1	V
Power Consumption	Typical power consumption at 1000 Mbps	120	mW
Operating Temperature Range	Temperature range for normal operation	-40 to 85	掳C
Storage Temperature Range	Temperature range for storage	-65 to 150	掳C
ESD Protection	Human Body Model (HBM)	2000	V

Instructions for Using DP83223V:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 1.65V to 3.6V.
   • Use a stable and clean power source to avoid noise and instability.

2. Data Rate:

   • The device supports a maximum output data rate of 1000 Mbps. Ensure your system can handle this data rate.

3. Input Signals:

   • The input common-mode voltage should be within 0.4V to 2.4V.
   • The differential input voltage should not exceed 卤0.5V.

4. Output Signals:

   • The differential output swing should be between 400mV and 1200mV.
   • The output common-mode voltage should be within 0.9V to 2.1V.

5. Power Consumption:

   • At 1000 Mbps, the typical power consumption is 120 mW. Ensure your power supply can handle this load.

6. Temperature:

   • The operating temperature range is -40掳C to 85掳C. Avoid exposing the device to temperatures outside this range during operation.
   • The storage temperature range is -65掳C to 150掳C. Store the device in a suitable environment to prevent damage.

7. ESD Protection:

   • The device has ESD protection up to 2000V HBM. However, handle the device with care to avoid static discharge.

8. Layout Considerations:

   • Use short and direct traces for high-speed signals to minimize signal degradation.
   • Place decoupling capacitors close to the power pins to reduce noise and improve stability.

9. Testing:

   • Before integrating the device into your system, perform initial testing under controlled conditions to ensure it meets the required specifications.

10. Documentation:

    • Refer to the datasheet and application notes for more detailed information and specific use cases.

(For reference only)