Details

---

BUY JQX-14FW-012-HS(555) https://www.utsource.net/itm/p/12605131.html

Parameter	Value
Type	Relay
Model	JQX-14FW-012-HS(555)
Coil Voltage	12V DC
Coil Power Consumption	0.6W
Contact Form	5PDT (5 Pole Double Throw)
Rated Load	10A, 250V AC / 10A, 30V DC
Insulation Resistance	>100MΩ at 500V DC
Dielectric Strength	2500V AC for 1 minute
Contact Resistance	≤50mΩ (initial)
Mechanical Life	10 million operations
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Weight	15g
Dimensions	27.5mm x 27.5mm x 20mm

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the coil terminals to the control circuit using appropriate wire gauge.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit as required.

3. Operation:

   • Apply the rated coil voltage to energize the relay and switch the contacts.
   • Ensure the load current does not exceed the rated load capacity to avoid damage.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a soft, dry cloth if necessary.

5. Safety:

   • Do not exceed the maximum operating temperature to prevent failure.
   • Disconnect power before performing any maintenance or testing.

6. Storage:

   • Store the relay in a dry, cool place to prevent corrosion and damage.

7. Troubleshooting:

   • If the relay fails to operate, check the coil voltage and connections.
   • If the contacts are stuck, ensure the relay is not overloaded and check for mechanical issues.

(For reference only)