Details

---

BUY KSD301 K70 70掳C Normally Open Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12605162.html

Parameter	Specification
Model	KSD301 K70
Type	Normally Open Temperature Control Switch Thermostat
Temperature Rating	70掳C
Contact Form	SPST-NO (Single Pole Single Throw - Normally Open)
Max Current	16A
Max Voltage	250VAC
Switching Capacity	16A/250VAC
Differential	10掳C 卤5掳C
Operating Temp. Range	-40掳C to 105掳C
Terminal Type	Quick Connect Terminals
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	2000VAC for 1 minute
Mounting Method	Snap Fit or Screw Mount
Dimensions	Approx. 19mm x 19mm x 17mm
Weight	Approx. 8g
Package Quantity	5 pcs

Instructions:

1. Installation: Ensure the thermostat is installed in a location where it can accurately sense the temperature of the component or area you wish to monitor.
2. Connections: Use the quick connect terminals to attach wiring securely. Ensure all connections are tight and free from corrosion.
3. Testing: Before operation, test the switch to ensure it opens and closes at the specified temperatures. This can be done using a temperature-controlled environment or a heat source.
4. Operation: Once installed and tested, the thermostat will automatically close the circuit when the temperature rises above 70掳C and reopen once the temperature drops by approximately 10掳C.
5. Maintenance: Periodically inspect the thermostat for any signs of damage or wear. Clean the contacts if necessary to maintain proper function.
6. Caution: Do not exceed the maximum current or voltage ratings as this can lead to failure or safety hazards. Always disconnect power before performing maintenance or adjustments.

(For reference only)