Details

---

BUY KSD301 K80 80掳C Normally Open Temperature Control Switch Thermostats (5pcs) https://www.utsource.net/itm/p/12605163.html

Parameter	Specification
Model	KSD301 K80
Type	Temperature Control Switch, Thermostat
Switching Action	Normally Open (NO)
Operating Temperature	80掳C
Contact Form	SPST-NO (Single Pole Single Throw - Normally Open)
Rated Current	16A (Resistive Load)
Rated Voltage	250VAC
Differential	10掳C (Typical)
Dimensions	19.7mm x 12.4mm x 11.5mm
Mounting Method	Snap Fit
Insulation Resistance	>100M惟 at 500VDC
Dielectric Strength	2000VAC for 1 minute
Life Expectancy	10,000 cycles minimum
Ambient Operating Temperature	-20掳C to 80掳C
Weight	Approximately 5g

Instructions for Use:

1. Installation:

   • Ensure the thermostat is installed in an area where it can accurately sense the temperature of the intended environment or component.
   • Mount the thermostat using the snap-fit method into the designated housing or enclosure.

2. Wiring:

   • Connect the normally open contacts to your circuit. When the temperature reaches 80掳C, the switch will close, completing the circuit.
   • Ensure all wiring connections are secure and insulated to prevent short circuits.

3. Testing:

   • Before operation, test the thermostat to ensure it operates correctly at the specified temperature.
   • Gradually increase the temperature until the switch activates, confirming it closes as expected at 80掳C.

4. Maintenance:

   • Regularly inspect the thermostat for any signs of damage or wear.
   • Clean the thermostat if necessary, ensuring no water or cleaning agents come into contact with the electrical components.

5. Handling:

   • Handle the thermostat carefully to avoid damaging the sensitive internal components.
   • Do not exceed the maximum operating temperature or mechanical stress limits.

6. Storage:

   • Store in a cool, dry place away from direct sunlight and sources of heat.

These specifications and instructions apply to each of the 5pcs included in the package.

(For reference only)