Details

---

BUY S2-24V https://www.utsource.net/itm/p/12605178.html

Parameter	Value	Description
Model	S2-24V	Series 2, 24V model
Voltage	24V DC	Operating voltage
Current Rating	5A	Maximum continuous current
Power Consumption	120W	Maximum power consumption
Efficiency	90%	Typical efficiency at rated load
Operating Temp.	-40掳C to 85掳C	Temperature range for operation
Storage Temp.	-40掳C to 125掳C	Temperature range for storage
Humidity	0% to 95% RH	Relative humidity, non-condensing
Protection	Overvoltage	Protection against overvoltage conditions
	Overcurrent	Protection against overcurrent conditions
	Short Circuit	Protection against short circuit conditions
	Thermal	Protection against overheating
Certifications	CE, UL, RoHS	Compliance with safety and environmental standards
Dimensions	50mm x 30mm	Width x Height (excluding terminals)
Weight	100g	Approximate weight

Instructions:

1. Installation:

   • Ensure the power supply is disconnected before installation.
   • Mount the S2-24V on a flat, stable surface with adequate ventilation.
   • Connect the positive terminal to the positive input and the negative terminal to the negative input.

2. Operation:

   • Turn on the power supply after all connections are secure.
   • Monitor the output to ensure it meets the required specifications.
   • Do not exceed the maximum current rating to avoid damage.

3. Maintenance:

   • Regularly inspect the unit for signs of wear or damage.
   • Clean the unit with a dry cloth to remove dust and debris.
   • Do not use abrasive materials or solvents that could damage the unit.

4. Troubleshooting:

   • No Output: Check all connections and ensure the power supply is functioning.
   • Overheating: Ensure proper ventilation and check for any blockages.
   • Output Fluctuations: Verify the stability of the input voltage and load.

5. Storage:

   • Store the unit in a dry, cool place away from direct sunlight.
   • Avoid storing in environments with extreme temperatures or high humidity.

(For reference only)