Details

---

BUY MXP4002AT https://www.utsource.net/itm/p/12605184.html

Below is the parameter table and instructions for the MXP4002AT, a pressure sensor.

MXP4002AT Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VDD	2.7	5.0	5.5	V
Operating Temperature Range		-40		125	掳C
Pressure Range		0		100	kPa
Output Signal	VOUT	0.06	4.94	5.00	V
Sensitivity	S	48	50	52	mV/kPa
Non-Linearity	NL	-0.2	0	0.2	%FSO
Hysteresis	HYST	-0.1	0	0.1	%FSO
Temperature Coefficient of Zero	TCZ	-0.03	0	0.03	%FSO/掳C
Temperature Coefficient of Span	TCS	-0.03	0	0.03	%FSO/掳C
Input Impedance	Zin	10	10	10	k惟
Output Impedance	Zout	1.0	1.0	1.0	k惟
Bandwidth	BW	0	100	1000	Hz

Instructions for Using MXP4002AT

1. Power Supply:

   • Connect the supply voltage (VDD) to the positive terminal of the sensor.
   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Ground the negative terminal (GND).

2. Signal Output:

   • The output signal (VOUT) will vary linearly with the applied pressure.
   • The typical output range is from 0.06V to 4.94V for a pressure range of 0 to 100 kPa.
   • Connect the output signal to your measurement or control system.

3. Temperature Considerations:

   • The sensor is designed to operate within a temperature range of -40掳C to 125掳C.
   • Be aware of the temperature coefficient of zero (TCZ) and span (TCS) which can affect the accuracy of the readings.

4. Calibration:

   • For high-precision applications, calibrate the sensor using known pressure points.
   • Use the sensitivity (S) and non-linearity (NL) parameters to adjust the readings.

5. Mounting:

   • Mount the sensor in a location where it is not subjected to mechanical stress or vibration.
   • Ensure the pressure port is aligned correctly with the pressure source.

6. Electrical Connections:

   • Use shielded cables to minimize noise interference.
   • Keep the leads short to reduce signal degradation.

7. Storage and Handling:

   • Store the sensor in a dry, clean environment.
   • Handle the sensor with care to avoid damaging the sensitive components.

By following these instructions, you can ensure optimal performance and reliability of the MXP4002AT pressure sensor.

(For reference only)