Details

---

BUY SKKT106B16E https://www.utsource.net/itm/p/12605200.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating voltage range
Output Current	IOUT	-	100	300	mA	Maximum output current per channel
Standby Current	ISB	-	1	5	渭A	Current consumption in standby mode
Operating Temperature	TOPR	-40	-	85	掳C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Output Low Voltage	VOL	0	0.4	0.9	V	Output low level voltage
Output High Voltage	VOH	2.4	4.5	5.0	V	Output high level voltage
Input Voltage Range	VIN	0	-	5.5	V	Valid input voltage range
Rise Time	TR	-	20	50	ns	Output rise time
Fall Time	TF	-	20	50	ns	Output fall time

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Connect the VDD pin to a stable power source.

2. Output Configuration:

   • The device can drive up to 300mA per channel. Ensure the load does not exceed this limit.
   • For optimal performance, keep the output current close to the typical value of 100mA.

3. Standby Mode:

   • To enter standby mode, set the appropriate control signal to the required state as specified in the datasheet.
   • Monitor the standby current to ensure it remains within the 1渭A to 5渭A range.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

5. Output Levels:

   • Ensure that the output low voltage (VOL) is between 0V and 0.9V, and the output high voltage (VOH) is between 2.4V and 5.0V.
   • These levels are critical for proper communication with other digital circuits.

6. Input Signal:

   • The valid input voltage range is from 0V to 5.5V. Ensure that all input signals fall within this range to avoid damage or incorrect operation.

7. Timing Parameters:

   • The rise time (TR) and fall time (TF) should be within 20ns to 50ns to ensure proper signal integrity and timing.

8. Handling and Storage:

   • Handle the device with care to avoid static discharge and physical damage.
   • Store the device in a dry, cool place to prevent moisture-related issues.

(For reference only)