Details

---

BUY 2010 Chip Resistor 5% 1/2W 1R2 https://www.utsource.net/itm/p/12605203.html

Parameter	Value
Type	Chip Resistor
Model	2010
Resistance	1.2 惟 (1R2)
Tolerance	卤5%
Power Rating	1/2 W (0.5 W)
Operating Temperature	-55掳C to +125掳C
Size	20 x 10 mm
Termination	Soldering
Material	Metal Oxide Film
Compliance	RoHS

Instructions for Use:

1. Handling:

   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high humidity and corrosive environments.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants.
   • Place the resistor on the designated pads.
   • Solder the resistor using a temperature-controlled soldering iron.
   • Do not exceed the maximum soldering temperature of 260掳C for more than 10 seconds.

3. Soldering:

   • Use a suitable flux and solder for surface mount technology (SMT).
   • Ensure the solder joints are smooth and free from bridges or voids.
   • Inspect the solder joints visually or using an automated inspection system.

4. Testing:

   • After mounting, test the resistance value using a multimeter to ensure it meets the specified tolerance.
   • Check for any short circuits or open circuits.

5. Storage:

   • Store in a dry, cool place to prevent moisture absorption.
   • Use within the recommended shelf life to ensure optimal performance.

6. Disposal:

   • Dispose of the resistor in accordance with local environmental regulations.
   • Recycle if possible.

(For reference only)