Details

---

BUY G3MC-201PL-VD-LG-12VDC https://www.utsource.net/itm/p/12605205.html

Parameter	Description
Part Number	G3MC-201PL-VD-LG-12VDC
Type	Relay Module
Input Voltage	12V DC
Coil Resistance	180 惟 (nominal)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	5A at 250V AC / 30V DC
Switching Capacity	5A, 250V AC / 30V DC
Insulation Resistance	100 M惟 (min) at 500V DC
Dielectric Strength	1500V AC (min) for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Relative Humidity	5% to 95% (non-condensing)
Life Expectancy	100,000 operations (mechanical), 10,000 operations (electrical)
Dimensions	17.5mm x 12.5mm x 12.5mm
Weight	3.5g
Mounting	Surface Mount (SMD)
Compliance	RoHS, REACH, UL, CE

Instructions

1. Power Supply:

   • Ensure the input voltage is 12V DC. Do not exceed this voltage to avoid damaging the relay module.

2. Installation:

   • Surface mount the relay module on a PCB using standard SMD soldering techniques.
   • Ensure proper orientation and alignment during installation.

3. Wiring:

   • Connect the control signal to the relay coil terminals.
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

4. Operation:

   • When the control signal is applied to the coil, the relay will switch the contacts from NC to NO.
   • When the control signal is removed, the relay will return to its default state (NC).

5. Environmental Considerations:

   • Operate the relay within the specified temperature and humidity ranges to ensure reliable performance.
   • Avoid exposure to condensation and corrosive environments.

6. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or shows physical damage.

7. Safety:

   • Follow all safety guidelines and regulations when handling and installing the relay.
   • Use appropriate personal protective equipment (PPE) when working with electrical components.

(For reference only)