Details

---

BUY DDB6U205N16L https://www.utsource.net/itm/p/12605247.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	V_IN	4.5	-	20	V
Output Voltage	V_OUT	-	5	-	V	Fixed
Output Current	I_OUT	-	2	3	A
Quiescent Current	I_Q	-	20	40	渭A
Dropout Voltage	V_DO	-	1.2	1.8	V
Load Regulation	-	-	0.2	1	%
Line Regulation	-	-	0.1	0.5	%
Ripple Rejection	-	50	70	80	dB	@ 100 Hz
Operating Temperature	T_OP	-40	-	125	掳C
Storage Temperature	T_ST	-65	-	150	掳C
Thermal Resistance (胃JA)	-	-	45	-	掳C/W

Instructions for Use:

1. Input Voltage:

   • Ensure the input voltage is within the specified range of 4.5V to 20V.
   • Avoid exceeding the maximum input voltage to prevent damage to the device.

2. Output Voltage:

   • The output voltage is fixed at 5V. No external resistors are required for voltage setting.

3. Output Current:

   • The device can provide up to 3A of output current, with typical operation at 2A.
   • Ensure the load does not exceed the maximum output current to avoid overheating.

4. Quiescent Current:

   • The quiescent current is typically 20渭A and can go up to 40渭A.
   • This low quiescent current makes the device suitable for battery-powered applications.

5. Dropout Voltage:

   • The dropout voltage is typically 1.2V and can be as high as 1.8V.
   • Ensure the input voltage is at least 1.8V higher than the output voltage to maintain regulation.

6. Load and Line Regulation:

   • The load regulation is typically 0.2% and can be as high as 1%.
   • The line regulation is typically 0.1% and can be as high as 0.5%.
   • These parameters ensure stable output voltage under varying load and input conditions.

7. Ripple Rejection:

   • The ripple rejection is typically 70dB and can range from 50dB to 80dB at 100Hz.
   • This helps in filtering out input voltage noise and maintaining a clean output.

8. Operating Temperature:

   • The device can operate over a temperature range of -40掳C to 125掳C.
   • Ensure the ambient temperature does not exceed these limits to avoid thermal stress.

9. Storage Temperature:

   • The device can be stored between -65掳C and 150掳C.
   • Store the device in a dry, cool place to prevent damage.

10. Thermal Management:

    • The thermal resistance (胃JA) is typically 45掳C/W.
    • Consider using a heatsink or other cooling methods if the device will be operating near its maximum power dissipation.

11. PCB Layout:

    • Place the device close to the load to minimize trace inductance.
    • Use wide, short traces for power and ground connections to reduce parasitic inductance and resistance.

12. Capacitors:

    • Use a 10渭F ceramic capacitor on the input side and a 10渭F ceramic capacitor on the output side for stability.
    • Ensure the capacitors have a voltage rating higher than the maximum expected voltage on each rail.

13. Polarity:

    • Ensure correct polarity when connecting the input and output terminals.
    • Reverse polarity can damage the device.

14. Power-Up Sequence:

    • Apply the input voltage slowly to avoid inrush currents.
    • If using multiple regulators, ensure they power up in the correct sequence if necessary.

By following these guidelines, you can ensure reliable and efficient operation of the DDB6U205N16L regulator.

(For reference only)