Details

---

BUY F5 LED 5MM Red and Green (common green) Common Cathode 3Pin (50pcs) https://www.utsource.net/itm/p/12605281.html

Parameter	F5 LED 5MM Red and Green (Common Green) Common Cathode 3Pin
Type	Bicolor LED
Size	5mm
Color	Red and Green
Common Terminal	Cathode (Common Green)
Pins	3Pin
Quantity	50pcs
Operating Voltage	2.0V - 2.2V (Typical)
Operating Current	20mA (Max)
Viewing Angle	30掳
Lens Type	Diffused

Instructions for Use:

1. Identify the Pins:

   • The common cathode pin is connected to the negative terminal of the power supply.
   • The other two pins correspond to the anodes of the red and green LEDs.

2. Connecting the LED:

   • Connect the common cathode pin to the ground or negative terminal of your circuit.
   • To light up the red LED, apply positive voltage to the red anode pin.
   • To light up the green LED, apply positive voltage to the green anode pin.

3. Power Supply:

   • Ensure the power supply voltage does not exceed the operating voltage range to avoid damaging the LED.
   • Use a current-limiting resistor in series with each anode pin to prevent excessive current flow.

4. Mounting:

   • These LEDs can be surface-mounted or used with breadboards and perfboards.
   • Handle with care to avoid physical damage to the leads or lens.

5. Storage:

   • Store in a cool, dry place away from direct sunlight to maintain longevity.

(For reference only)