Details

---

BUY HD2F3P-T1 https://www.utsource.net/itm/p/12605699.html

Parameter	Description	Value
Type	Type of Device	Relay
Model	Model Number	HD2F3P-T1
Contact Form	Contact Configuration	SPDT
Coil Voltage	Coil Operating Voltage	5V DC
Coil Current	Coil Operating Current	70mA
Contact Rating	Contact Load Rating	10A at 250V AC
Insulation	Insulation Resistance	100M惟 (min)
Dielectric	Dielectric Strength	2500V AC (1 min)
Mechanical Life	Mechanical Operation Life	10 million cycles
Electrical Life	Electrical Operation Life (at rated load)	100,000 cycles
Operating Temp.	Operating Temperature Range	-40掳C to +85掳C
Storage Temp.	Storage Temperature Range	-40掳C to +125掳C
Weight	Weight	5g
Dimensions	Dimensions (L x W x H)	17.5mm x 12.5mm x 12.5mm

Instructions for Use:

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay on a flat surface using the provided mounting holes or clips.

2. Wiring:

   • Connect the coil terminals to the control circuit according to the specified coil voltage.
   • Connect the common (C), normally open (NO), and normally closed (NC) contacts to the load circuit as required.

3. Operation:

   • Apply the specified coil voltage to energize the relay.
   • The normally open (NO) contact will close, and the normally closed (NC) contact will open when the coil is energized.
   • When the coil is de-energized, the contacts return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Do not exceed the specified operating temperature range to avoid damage to the relay.

5. Safety:

   • Ensure the relay is disconnected from power before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)