Details

---

BUY SRKE-1CT-SL-12VDC https://www.utsource.net/itm/p/12605876.html

Parameter	Description
Part Number	SRKE-1CT-SL-12VDC
Type	Relay Module
Input Voltage	12V DC
Coil Resistance	1000 Ohms
Contact Form	SPST (Single Pole Single Throw)
Contact Rating	10A at 250V AC / 10A at 30V DC
Insulation Voltage	1000V AC / 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Relative Humidity	5% to 95% RH (non-condensing)
Dimensions	36mm x 18mm x 14mm
Weight	10g
Mounting	Surface Mount

Instructions for Use

1. Power Supply:

   • Connect the 12V DC power supply to the relay module. Ensure the polarity is correct to avoid damage.

2. Control Signal:

   • Apply a control signal to the input terminal to activate the relay. The control signal should be within the specified voltage range.

3. Load Connection:

   • Connect the load to the relay contacts. Ensure the load current does not exceed the contact rating of 10A.

4. Installation:

   • Mount the relay module on a suitable surface using the provided mounting holes. Ensure there is adequate ventilation to prevent overheating.

5. Testing:

   • Test the relay by applying the control signal and verifying that the contacts switch as expected. Use a multimeter to check continuity across the contacts.

6. Safety:

   • Do not exceed the maximum operating temperature or apply voltages higher than the rated insulation voltage.
   • Ensure proper isolation and grounding to prevent electrical shock.

7. Maintenance:

   • Regularly inspect the relay for signs of wear or damage. Replace the relay if any issues are detected.

8. Disposal:

   • Dispose of the relay module in accordance with local environmental regulations.

(For reference only)