Details

---

BUY PF6003AS https://www.utsource.net/itm/p/12605883.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7		5.5	V
Output Current	IOUT	Continuous		300		mA
Quiescent Current	IQ	VOUT = 3.3V, IOUT = 0mA		1.2		渭A
Dropout Voltage	VDROPOUT	IOUT = 300mA		300		mV
PSRR		1kHz		60		dB
Load Regulation		IOUT: 0mA to 300mA		0.5		%
Line Regulation		VIN: VOUT+1.2V to 5.5V		0.1		%

Instructions for PF6003AS

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the input pin.
   • Ensure a stable power supply to avoid transient overvoltages.

2. Output Configuration:

   • The output voltage is fixed at 3.3V; no external resistors are required for voltage setting.
   • Ensure the load current does not exceed 300mA continuously.

3. Grounding:

   • Provide a solid ground connection to ensure proper operation and stability of the regulator.

4. Bypass Capacitors:

   • Place a 1渭F ceramic capacitor close to the input pin to reduce noise and improve transient response.
   • Optionally, place a 1渭F ceramic capacitor on the output for additional stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near maximum output current.
   • Keep the ambient temperature within operational limits to prevent thermal shutdown.

6. PCB Layout:

   • Maintain short and wide traces for power and ground connections to minimize inductance and resistance.
   • Ensure proper clearance around the device to facilitate heat dissipation.

7. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Follow standard anti-static procedures during installation and handling.

(For reference only)