Details

---

BUY STD5NM50D https://www.utsource.net/itm/p/12605897.html

Parameter	Symbol	Value	Unit
Maximum Drain-Source Voltage	VDS(max)	500	V
Maximum Gate-Source Voltage	VGS(max)	卤20	V
Maximum Drain Current (Tc = 25掳C)	ID(max)	5	A
Maximum Power Dissipation (Tc = 25掳C)	PD(max)	115	W
Junction Temperature Range	TJ	-55 to 150	掳C
Storage Temperature Range	TSTG	-55 to 150	掳C
Continuous Drain Current (Tc = 25掳C)	IDS	5	A
On-State Resistance (VGS = 10V, ID = 5A)	RDS(on)	0.9	惟
Gate Charge	QG	40	nC
Input Capacitance	Ciss	1380	pF
Output Capacitance	Coss	120	pF
Reverse Transfer Capacitance	Crss	76	pF

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid mechanical stress.
   • Use appropriate heat sinks to manage the thermal resistance and ensure the junction temperature does not exceed 150掳C.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Apply the gate-source voltage (V_GS) within the specified range of 卤20V to avoid damage.
   • Ensure the drain current (I_D) does not exceed 5A at 25掳C to prevent overheating.

3. Thermal Management:

   • The maximum power dissipation (P_D(max)) is 115W at 25掳C. Use adequate cooling methods such as heat sinks or forced air cooling to maintain the device within safe operating temperatures.
   • Monitor the junction temperature (T_J) to ensure it stays within the -55掳C to 150掳C range.

4. Storage:

   • Store the device in a dry environment with temperatures between -55掳C and 150掳C to prevent damage.

5. Testing and Operation:

   • Before applying power, verify all connections and ensure the device is properly mounted.
   • Test the device under controlled conditions to ensure it meets the specified parameters.

6. Safety Precautions:

   • Always follow proper electrical safety guidelines when handling and testing the device.
   • Use protective equipment such as gloves and safety glasses when necessary.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections, power supply issues, and thermal management.
   • Refer to the datasheet for more detailed troubleshooting information.

(For reference only)