Details

---

BUY K40B65H2A https://www.utsource.net/itm/p/12605898.html

Parameter	Description	Value
Device Type	Type of device	High-Voltage MOSFET
Package	Package type	TO-220
VDS (Max)	Drain-to-Source Voltage	650 V
VGS (Max)	Gate-to-Source Voltage	卤20 V
ID (Max)	Continuous Drain Current	6.5 A
RDS(on)	On-State Resistance at VGS = 10 V	1.2 惟
PTOT (Max)	Total Power Dissipation	125 W
fSW (Max)	Switching Frequency	500 kHz
QG	Total Gate Charge	65 nC
QOSS	Output Capacitance Charge	18 nC
TJ (Max)	Junction Temperature	150 掳C
TA (Op)	Operating Ambient Temperature Range	-55 to +150 掳C
Storage Temperature Range	Storage Temperature Range	-65 to +150 掳C

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid damage to the leads or body.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply a suitable thermal compound between the device and heat sink to improve thermal conductivity.
   • Torque the mounting screws to the recommended value to avoid excessive pressure on the device.

3. Biasing:

   • Apply the gate voltage (V_GS) carefully to avoid exceeding the maximum ratings.
   • Use a gate resistor to limit the current during switching transitions.

4. Thermal Management:

   • Ensure adequate cooling, such as a heat sink or forced air cooling, to keep the junction temperature within the specified range.
   • Monitor the device temperature during operation to prevent overheating.

5. Circuit Design:

   • Design the circuit to minimize parasitic inductances and capacitances.
   • Use bypass capacitors close to the device to filter out high-frequency noise.

6. Testing:

   • Test the device under controlled conditions to ensure it meets the required performance specifications.
   • Perform thermal testing to verify that the device operates within safe temperature limits.

7. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Follow the recommended storage temperature range to prevent damage.

8. Disposal:

   • Dispose of the device according to local environmental regulations and guidelines.

(For reference only)