Details

---

BUY SKKT330/16E https://www.utsource.net/itm/p/12605900.html

Parameter	Symbol	Min	Typ	Max	Unit
Rated Current	IF	-	330	-	A
Peak Surge Current	IFSM	-	800	-	A
Forward Voltage Drop	VF	1.5	2.2	3.0	V
Reverse Blocking Voltage	VBR	16	-	-	V
Junction Temperature	TJ	-40	-	150	°C
Storage Temperature	TSTG	-40	-	150	°C
Operating Temperature	TOP	-40	-	125	°C
Thermal Resistance	RθJC	-	0.3	-	K/W

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink to maintain the junction temperature within the specified limits.
   • Use thermal grease or a thermal pad to improve heat transfer between the device and the heatsink.

2. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to avoid reverse polarity, which can lead to device failure.
   • Use appropriate wire gauges to handle the rated current without excessive voltage drop or overheating.

3. Surge Handling:

   • The device can handle peak surge currents up to 800A, but ensure these surges are short and infrequent to prevent damage.
   • For applications with frequent surges, consider derating the current or using additional protective components.

4. Temperature Management:

   • Monitor the junction temperature to ensure it does not exceed 150°C.
   • If operating in high ambient temperatures, ensure adequate cooling to keep the device within its operating temperature range.

5. Storage:

   • Store the device in a dry environment within the storage temperature range of -40°C to 150°C.
   • Avoid exposure to corrosive environments or excessive humidity.

6. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the leads.
   • Use ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

7. Testing:

   • Before installation, test the device for proper functionality using a multimeter or a dedicated testing setup.
   • Verify that the forward voltage drop and reverse blocking voltage meet the specified parameters.

8. Compliance:

   • Ensure that the application complies with relevant safety and regulatory standards.
   • Consult the datasheet for any specific compliance information or additional guidelines.

(For reference only)