Details

---

BUY CM100DY-24H https://www.utsource.net/itm/p/12605901.html

Parameter	Symbol	Value	Unit
Rated Voltage	Vr	200	V
Maximum Repetitive Peak	Vdrm	300	V
Non-Repetitive Peak	Vrrm	330	V
Rated RMS Current	Ir	100	A
Surge Current (8.3ms)	Ism	600	A
Gate Trigger Current	Igt	10	mA
Holding Current	Ih	5	A
Power Dissipation	Pd	200	W
Junction Temperature	Tj	-40 to +125	°C
Storage Temperature	Ts	-40 to +125	°C

Instructions for Use:

1. Mounting:

   • Ensure the device is securely mounted on a heatsink to maintain proper thermal management.
   • Use appropriate mounting hardware and thermal compound to ensure good thermal conductivity.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity.
   • The gate terminal should be connected to the control circuit with appropriate current limiting resistors.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure the junction temperature remains within the specified range to prevent damage.

4. Surge Handling:

   • The device can handle surge currents up to 600A for short durations (8.3ms). Ensure the circuit design accounts for these conditions.

5. Gate Triggering:

   • The minimum gate trigger current required to turn on the device is 10mA. Ensure the control circuit provides this current.

6. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.
   • Handle with care to avoid mechanical stress and static discharge.

7. Testing:

   • Before installation, test the device using a controlled environment to verify its performance and parameters.

8. Safety Precautions:

   • Always use appropriate personal protective equipment (PPE) when handling high-voltage components.
   • Follow all local safety regulations and guidelines.

(For reference only)