Details

---

BUY SKIIP32NAB12T49 https://www.utsource.net/itm/p/12605909.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Voltage Rating (Collector-Emitter)	VCEO	-	1200	-	V	Maximum voltage between collector and emitter with the gate open.
Voltage Rating (Gate-Emitter)	VGE	-	20	-	V	Maximum voltage between gate and emitter.
Continuous Collector Current	IC	-	600	-	A	Maximum continuous current through the collector.
Peak Collector Current	IC(peak)	-	1200	-	A	Maximum peak current through the collector.
Power Dissipation	PTOT	-	3000	-	W	Maximum total power dissipation.
Junction Temperature	TJ	-25	-	150	°C	Operating temperature range for the junction.
Storage Temperature	TSTG	-55	-	150	°C	Temperature range for storage.
Turn-On Time	ton	-	1.5	-	μs	Time from the start of the turn-on pulse to when the device reaches 90% of its on-state current.
Turn-Off Time	toff	-	1.8	-	μs	Time from the start of the turn-off pulse to when the device reaches 10% of its on-state current.
Gate Charge	QG	-	120	-	nC	Total gate charge required to switch the device on.
Forward Voltage Drop	VCE(sat)	-	2.0	-	V	Voltage drop across the collector-emitter when the device is fully on.
Thermal Resistance (Junction to Case)	RθJC	-	0.2	-	K/W	Thermal resistance from the junction to the case.

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to manage thermal resistance.
   • Handle with care to avoid static damage.

2. Electrical Connections:

   • Connect the collector to the load and the emitter to the ground.
   • Apply the gate voltage carefully within the specified limits to avoid damage.

3. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Monitor the junction temperature to ensure it remains within the operating range.

4. Switching:

   • Use appropriate gate drive circuits to ensure fast and clean switching.
   • Consider the turn-on and turn-off times to optimize performance.

5. Storage:

   • Store in a dry, cool place within the specified storage temperature range.

6. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly inspect for signs of wear or damage.

7. Safety:

   • Follow all safety guidelines and regulations when handling high-voltage and high-current components.
   • Use protective equipment as necessary.

(For reference only)