Details

---

BUY LS204CD https://www.utsource.net/itm/p/12605915.html

Parameter	Description	Value
Part Number	Component Identifier	LS204CD
Type	Device Type	CMOS Logic Gate
Function	Logic Function	Quad 2-Input NAND Gate
Supply Voltage	Operating Voltage Range	2V to 6V
Input Voltage	Maximum Input Voltage	Vcc + 0.5V
Output Voltage	Maximum Output Voltage (High Level)	Vcc - 0.1V
Output Current	Maximum Output Current (Source/Sink)	卤8mA
**Propagation Delay	Time for Signal to Propagate	12ns (Typical at Vcc = 5V)
**Power Consumption	Maximum Power Consumption	10渭W (Typical at Vcc = 5V)
**Operating Temperature	Temperature Range for Operation	-40掳C to +85掳C
**Storage Temperature	Temperature Range for Storage	-65掳C to +150掳C
Package	Physical Package	SOIC-14
Pins	Number of Pins	14

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2V to 6V).
   • Connect the Vcc pin to the positive supply and GND pin to the ground.

2. Input Signals:

   • Apply input signals to the designated input pins.
   • Ensure input voltages do not exceed Vcc + 0.5V to avoid damage.

3. Output Signals:

   • The output will be high (Vcc - 0.1V) when both inputs of any gate are low.
   • The output will be low (0.1V) when at least one input of any gate is high.
   • Do not exceed the maximum output current of 卤8mA.

4. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Store the device in a dry, cool place within the specified storage temperature range.

5. Mounting:

   • Solder the device to the PCB using appropriate soldering techniques and temperatures.
   • Ensure proper alignment and orientation of the device during mounting.

6. Testing:

   • Test the device under typical operating conditions to ensure it meets the specified performance parameters.
   • Verify the propagation delay and power consumption as needed.

(For reference only)