Details

---

BUY TPS1H100BQPWPRQ1 https://www.utsource.net/itm/p/12605925.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	-	0.1	-	60	V
Continuous Current	IOUT	Ta = 25°C	-	40	80	A
Peak Current	IOUT(p)	Tj = 150°C, t < 1ms	-	130	-	A
RDS(ON) @ VGS=12V	RDS(ON)	ID=-80A, Ta=25°C	7.5	-	12	mΩ
Gate Charge	QG	-	-	75	-	nC
Turn-on Time	ton	-	-	140	-	ns
Turn-off Time	toff	-	-	90	-	ns
Operating Junction Temp	Tj	-	-55	-	150	°C

Instructions for TPS1H100BQPWPRQ1:

1. Power Supply Considerations:

   • Ensure the input voltage (VIN) is within the range of 0.1V to 60V.
   • Use appropriate decoupling capacitors near the power supply pins to minimize noise.

2. Current Handling:

   • The device can handle a continuous current up to 80A at room temperature (Ta = 25°C).
   • For peak current applications, ensure that the duration does not exceed 1ms and the junction temperature does not exceed 150°C.

3. Thermal Management:

   • Monitor the junction temperature (Tj) to stay within -55°C to 150°C.
   • Proper heat sinking or cooling mechanisms may be necessary depending on the application to prevent overheating.

4. Switching Characteristics:

   • The turn-on time (ton) is typically 140ns, and the turn-off time (toff) is typically 90ns.
   • Ensure that the gate drive circuitry can support these switching times to avoid potential damage or malfunction.

5. Gate Drive Requirements:

   • The gate charge (QG) is 75nC. Ensure that the gate driver can provide sufficient current to charge and discharge the gate capacitance efficiently.

6. Safe Operating Area (SOA):

   • Refer to the SOA graph in the datasheet to ensure that the device operates within safe limits under all conditions.

7. Handling and Storage:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Store in a dry environment and follow the recommended storage practices as per the manufacturer’s guidelines.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)