Details

---

BUY ACST47S https://www.utsource.net/itm/p/12605929.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	100	150	mA	Continuous output current
Quiescent Current	IQ	-	10	20	渭A	Current consumption in active mode
Rise Time	tr	-	200	400	ns	Time to rise from 10% to 90% of VOUT
Fall Time	tf	-	200	400	ns	Time to fall from 90% to 10% of VOUT
Propagation Delay	tpLH	-	150	300	ns	Delay time from input low to output high
Propagation Delay	tpHL	-	150	300	ns	Delay time from input high to output low
Input Capacitance	CIN	-	10	15	pF	Capacitance at input pin
Output Capacitance	COUT	-	5	10	pF	Capacitance at output pin
Operating Temp.	Toper	-40	-	125	掳C	Operating temperature range
Storage Temp.	Tstg	-65	-	150	掳C	Storage temperature range

Instructions for Using ACST47S:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Connect the VDD pin to the power supply and the GND pin to ground.

2. Output Current (IOUT):

   • The device can provide a continuous output current of up to 150mA.
   • Avoid exceeding this limit to prevent damage to the component.

3. Quiescent Current (IQ):

   • The quiescent current is typically 10渭A, but it can go up to 20渭A.
   • This current is consumed by the device when it is active.

4. Rise and Fall Times (tr, tf):

   • The rise and fall times are typically around 200ns, with a maximum of 400ns.
   • These parameters are important for ensuring proper signal integrity in high-speed applications.

5. Propagation Delays (tpLH, tpHL):

   • The propagation delay from input low to output high (tpLH) and from input high to output low (tpHL) are typically 150ns, with a maximum of 300ns.
   • These delays should be considered when designing timing-critical circuits.

6. Input and Output Capacitance (CIN, COUT):

   • The input capacitance (CIN) is typically 10pF, with a maximum of 15pF.
   • The output capacitance (COUT) is typically 5pF, with a maximum of 10pF.
   • These values can affect the performance of the circuit, especially in high-frequency applications.

7. Operating Temperature (Toper):

   • The device is designed to operate over a temperature range of -40掳C to 125掳C.
   • Ensure that the operating environment does not exceed these limits.

8. Storage Temperature (Tstg):

   • The storage temperature range is -65掳C to 150掳C.
   • Store the device in a temperature-controlled environment to avoid damage.

9. Handling:

   • Handle the device with care to avoid static discharge.
   • Use appropriate ESD protection measures when handling and installing the component.

10. Mounting:

    • Follow the recommended PCB layout and mounting guidelines provided by the manufacturer to ensure optimal performance and reliability.

(For reference only)