Details

---

BUY 2SA1215 https://www.utsource.net/itm/p/12605941.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage (Reverse)	VCEO	-	45	-	V
Collector-Base Voltage (Reverse)	VCBO	-	50	-	V
Emitter-Base Voltage (Reverse)	VEBO	-	5	-	V
Collector Current (Continuous)	IC	-	150	-	mA
Collector Dissipation (Max)	PT	-	625	-	mW
Base-Emitter Saturation Voltage	VBE(sat)	-	0.7	1.2	V
Collector-Emitter Saturation Voltage	VCE(sat)	-	0.3	0.8	V
Storage Temperature Range	TSTG	-55	-	150	掳C
Operating Junction Temperature	TJ	-55	-	150	掳C

Instructions for Use:

1. Handling:

   • Handle the 2SA1215 with care to avoid static damage.
   • Use appropriate anti-static measures when handling the component.

2. Mounting:

   • Ensure proper heat dissipation if operating near the maximum power dissipation.
   • Use a heatsink if necessary, especially for continuous high-power applications.

3. Biasing:

   • Ensure that the base current is sufficient to keep the transistor in saturation when used as a switch.
   • For linear applications, ensure the base current is within the recommended range to avoid overheating.

4. Voltage and Current Limits:

   • Do not exceed the maximum collector-emitter voltage (V_CEO), collector-base voltage (V_CBO), or emitter-base voltage (V_EBO).
   • Ensure the collector current (I_C) does not exceed the maximum rating to prevent damage.

5. Temperature Considerations:

   • Operate the transistor within the specified storage and operating temperature ranges to ensure reliability.
   • Monitor the junction temperature (T_J) to avoid thermal runaway.

6. Testing:

   • Use a multimeter or a transistor tester to verify the functionality of the 2SA1215 before installation.
   • Test the transistor under actual operating conditions to ensure it meets the required specifications.

7. Storage:

   • Store the 2SA1215 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the components in their original packaging until ready for use to protect them from environmental factors.

(For reference only)