Details

---

BUY SKD146/16-L100 https://www.utsource.net/itm/p/12605956.html

Parameter	Description	Value
Part Number	Full part number	SKD146/16-L100
Type	Type of device	Surface Mount Diode
Package	Package type	SOD-123
Forward Voltage (Vf)	Forward voltage at specified current	0.7V @ 1A
Reverse Voltage (Vr)	Maximum reverse voltage	100V
Peak Reverse Current (Irm)	Peak reverse current	5mA
Average Rectified Output Current (Io)	Average rectified output current at 25°C ambient temperature	1.5A
Power Dissipation (Pd)	Maximum power dissipation	1W
Operating Temperature (Tj)	Junction operating temperature range	-55°C to +150°C
Storage Temperature (Ts)	Storage temperature range	-65°C to +150°C
Thermal Resistance (Rθja)	Thermal resistance from junction to ambient	125°C/W
Capacitance (Cj)	Junction capacitance at 0V bias	4pF
Mounting Position	Recommended mounting position	Any
RoHS Compliance	Compliance with RoHS standards	Yes

Instructions for Use

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Use a soldering iron with a temperature setting of 260°C ± 10°C.
   • Soldering time should not exceed 10 seconds per connection.
   • Allow the component to cool naturally after soldering.

3. Electrical Connections:

   • Ensure correct polarity when connecting the diode.
   • Do not exceed the maximum ratings listed in the table.

4. Thermal Management:

   • Provide adequate heat sinking if operating near maximum power dissipation.
   • Monitor the junction temperature to ensure it remains within the specified range.

5. Testing:

   • Use a multimeter or diode tester to verify the functionality of the diode.
   • Check for continuity and reverse breakdown voltage as necessary.

6. PCB Layout:

   • Place the diode close to the load to minimize inductance.
   • Ensure proper clearance around the component to facilitate cooling.

7. Environmental Considerations:

   • The device is RoHS compliant and suitable for use in environmentally conscious designs.
   • Dispose of any waste materials in accordance with local regulations.

(For reference only)