Details
BUY KSZ8863RLLI https://www.utsource.net/itm/p/12605969.html
| Parameter | Description | KSZ8863RLLI Value |
|---|---|---|
| Package Type | The type of package used for the component | 48-Ld QFN |
| Operating Temperature | Range of temperatures in which the device can operate | -40°C to +85°C |
| Supply Voltage (VCC) | Voltage range required for operation | 2.7 V to 3.6 V |
| Data Rate | Maximum data transfer rate supported by the device | 10/100 Mbps |
| Interface | Communication interface type | SPI, MDIO |
| Number of Ports | Number of Ethernet ports available | 3 |
| PHY Type | Type of Physical Layer Interface | IEEE 802.3 10BASE-T/100BASE-TX |
| Wake-on-LAN | Capability to wake up a computer over the network | Supported |
| Low Power Mode | Ability to enter a low power state | Supported |
| LED Support | Support for status LEDs | Yes |
| MAC Address Storage | Storage capability for MAC addresses | Up to 128 entries |
| MTU Size | Maximum Transmission Unit size | 1536 bytes |
| Checksum Offload | Offloads checksum calculations from the CPU | Supported |
| Interrupt Pin | Pin that generates an interrupt signal | Available |
Instructions for Use:
Power Supply Connection: Connect the supply voltage (VCC) within the specified range of 2.7 V to 3.6 V. Ensure stable power supply to avoid unexpected behavior.
Configuration via SPI/MDIO: Configure the device using the SPI or MDIO interfaces as per your application requirements. Refer to the datasheet for specific configuration commands and sequences.
Ethernet Port Connections: Connect each of the three Ethernet ports to respective devices or networks ensuring correct cabling standards are followed.
Initialization: Upon powering up, initialize the device through the SPI or MDIO interface. This includes setting up port configurations, enabling/disabling features like Wake-on-LAN, and configuring MAC address filtering.
Firmware Updates: Keep the firmware updated as recommended by the manufacturer to benefit from performance improvements and security updates.
Monitoring and Maintenance: Regularly monitor the device’s operational parameters and perform maintenance checks to ensure optimal performance.
Troubleshooting: In case of issues, refer to the troubleshooting section in the datasheet or technical manual provided with the device.
View more about KSZ8863RLLI on main site