Details

---

BUY 60R580Q https://www.utsource.net/itm/p/12605983.html

Parameter	Value	Unit
Part Number	60R580Q	-
Type	Resistor	-
Resistance	580	惟
Tolerance	卤1%	-
Power Rating	60	W
Operating Temperature	-55 to +125	掳C
Maximum Working Voltage	350	V
Operating Humidity	0 to 95% (non-condensing)	% RH
Case Size	2512	-
Soldering Temperature	260掳C for 10 seconds	掳C
RoHS Compliance	Yes	-

Instructions for Use:

1. Handling:

   • Handle the resistor with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Mounting:

   • Ensure the mounting surface is clean and free from contaminants.
   • Apply solder within the specified temperature and time limits to avoid thermal stress.

3. Soldering:

   • Preheat the board to reduce thermal shock.
   • Use a soldering iron set to 260掳C and apply solder for no more than 10 seconds per joint.
   • Allow the solder joints to cool naturally without disturbance.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep in original packaging until ready for use to protect against moisture and static.

5. Inspection:

   • Visually inspect the resistor for any signs of damage or defects before installation.
   • Verify the resistance value using a multimeter if necessary.

6. Operational Environment:

   • Ensure the operating temperature remains within the specified range (-55掳C to +125掳C).
   • Avoid exposure to high humidity levels to prevent corrosion.

7. Compliance:

   • Confirm that the resistor meets all relevant safety and environmental standards, such as RoHS compliance.

8. Disposal:

   • Dispose of the resistor according to local regulations for electronic waste.

(For reference only)