Details

---

BUY CEP83A3 https://www.utsource.net/itm/p/12605988.html

Parameter	Description	Value
Part Number	Component Identifier	CEP83A3
Type	Component Type	Electronic Relay
Coil Voltage	Operating Voltage for the Coil	24V DC
Coil Current	Current Drawn by the Coil	70mA
Contact Form	Configuration of Contacts	SPDT
Contact Rating	Maximum Current per Contact	10A
Insulation Resistance	Resistance Between Contacts and Coil	100M惟 at 500V DC
Dielectric Strength	Voltage Withstand Capability	2500V AC
Mechanical Life	Expected Number of Operations	10,000,000 cycles
Electrical Life	Expected Number of Operations (at rated load)	1,000,000 cycles
Operating Temperature	Range of Ambient Temperatures	-40掳C to +85掳C
Storage Temperature	Range of Storage Temperatures	-40掳C to +125掳C
Mounting Position	Orientation for Proper Functioning	Any Position
Terminal Type	Connection Method	Solder Lug
Dimensions	Physical Size (LxWxH)	25mm x 18mm x 15mm
Weight	Mass of the Component	15g

Instructions:

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay in any position as it is designed to operate in any orientation.
   • Use the solder lug terminals to connect the relay to your circuit.

2. Coil Connection:

   • Connect the coil terminals to the specified coil voltage (24V DC).
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the load to the normally open (NO) or normally closed (NC) contacts as required.
   • Ensure the load current does not exceed the contact rating of 10A.

4. Operation:

   • Apply the coil voltage to energize the relay and switch the contacts.
   • The relay will switch the contacts based on the coil state (energized or de-energized).

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a soft, dry cloth if necessary.

6. Storage:

   • Store the relay in a dry, cool place within the storage temperature range (-40掳C to +125掳C).

7. Safety:

   • Do not exceed the maximum operating parameters to avoid damage or failure.
   • Ensure proper insulation and grounding to prevent electrical hazards.

(For reference only)