Details

---

BUY ADG1411YRUZ https://www.utsource.net/itm/p/12605992.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		2.7		5.5	V
On-Resistance	RON	VDD = 5V, VGS = 0V		1.8		Ω
Off-Leakage Current	ILEAK	VDD = 5V, VGS = 0V			1	nA
Input Signal Voltage	VIN		-0.5		VDD+0.5	V
Power Dissipation	PD	All channels on			360	mW
Operating Temperature	Toper		-40		85	°C
Storage Temperature	Tstg		-65		150	°C

Instructions for ADG1411YRUZ

1. Supply Voltage:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.

2. Installation and Handling:

   • Handle with care to avoid damage to the pins and the device.
   • Follow proper ESD precautions during handling and installation.

3. Powering the Device:

   • Apply the supply voltage before applying any signals to the input or output pins.
   • Verify that the power supply is stable and within the specified limits.

4. Signal Application:

   • Input signal voltage (VIN) should be between -0.5V and VDD + 0.5V to prevent damage to the device.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device in an environment where temperatures do not exceed -65°C to 150°C.

6. Power Dissipation:

   • Be mindful of the maximum power dissipation of 360mW when all channels are active.
   • Ensure adequate heat dissipation if operating near this limit.

7. Off-State Leakage:

   • Monitor off-leakage current, which should not exceed 1nA at VDD = 5V and VGS = 0V.

8. On-Resistance:

   • Expect a typical on-resistance (RON) of 1.8Ω when VDD = 5V and VGS = 0V. This can affect the performance in high-speed switching applications.

(For reference only)