Details

---

BUY PS219C5-AS https://www.utsource.net/itm/p/12605996.html

Parameter	Value
Part Number	PS219C5-AS
Description	Photocoupler
Type	AC Input Photo-TRIAC
Isolation Voltage (VIORM)	5000 Vrms (1 min)
Input Current (IF)	5 mA to 20 mA
Output Current (IT(RMS))	8 A RMS
Peak Output Current (ITSM)	80 A (10 ms, non-repetitive)
Turn-On Time (tON)	3 渭s (max)
Turn-Off Time (tOFF)	2 渭s (max)
Operating Temperature (TJ)	-40掳C to 100掳C
Storage Temperature (TSTG)	-40掳C to 125掳C
Package	DIP-4

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a PCB with adequate clearance from other components.
   • Use appropriate soldering techniques to avoid thermal damage.

2. Electrical Connections:

   • Connect the input terminals (pins 1 and 2) to the control circuit.
   • Connect the output terminals (pins 3 and 4) to the load and power supply.

3. Input Current:

   • Ensure the input current (IF) is within the specified range of 5 mA to 20 mA to guarantee proper operation.

4. Output Current:

   • The device can handle up to 8 A RMS continuously and up to 80 A peak for short durations (10 ms, non-repetitive).

5. Thermal Management:

   • If operating at high currents or temperatures, consider using a heatsink to maintain the junction temperature within the specified range (-40掳C to 100掳C).

6. Isolation:

   • The device provides 5000 Vrms isolation voltage for 1 minute. Ensure proper insulation and spacing to maintain this isolation.

7. Storage:

   • Store the device in a dry environment with temperatures between -40掳C and 125掳C to prevent damage.

8. Handling:

   • Handle the device with care to avoid mechanical stress or damage to the pins.

9. Testing:

   • Before final assembly, test the device to ensure it meets the required specifications and operates correctly under expected conditions.

10. Compliance:

    • Ensure that the use of the device complies with all relevant safety and regulatory standards.

(For reference only)