Details

---

BUY LTC6820I-MS https://www.utsource.net/itm/p/12606000.html

Parameter	Description	Specifications/Details
Part Number	LTC6820I-MS	Isolated SPI Interface for multicell battery stack monitoring
Function	Provides isolated communication between the host processor and LTC6804	Supports up to 12 series-connected cells
Isolation Voltage	Electrical isolation between ground domains	2500Vrms for one minute
Data Rate	Maximum data rate	Up to 1 Mbps
Supply Voltage (VDD)	Operating supply voltage range	2.7V to 5.5V
Operating Temperature	Temperature range for operation	-40掳C to +125掳C
Package Type	Type of package	SSOP-16 (Thin Shrink Small Outline Package)
Pin Count	Number of pins	16
ESD Protection	Electrostatic discharge protection	卤2kV Human Body Model (HBM)
Input Capacitance	Capacitance at input pins	10pF (typical)
Output Capacitance	Capacitance at output pins	5pF (typical)
Power Consumption	Current consumption	3mA (active mode), 1渭A (shutdown mode)

Instructions:

1. Power Supply Connection: Ensure that VDD is connected to a stable power supply within the specified range.
2. Grounding: Properly connect the GND pin to the system ground.
3. SPI Communication Setup: Connect MOSI, MISO, SCK, and CS pins as per standard SPI interface guidelines.
4. Isolation Considerations: Maintain appropriate creepage and clearance distances for safety due to high isolation voltage.
5. Signal Integrity: Use short traces for SPI signals to maintain signal integrity and reduce noise.
6. Decoupling Capacitors: Place decoupling capacitors close to the VDD pin to minimize noise and provide stable operation.
7. Temperature Monitoring: Operate within the specified temperature range to ensure reliable performance.
8. Shutdown Mode: To enter shutdown mode, set the CS pin low and keep it low for more than 20ms.

For detailed application circuits and advanced configurations, refer to the datasheet or application notes provided by the manufacturer.

(For reference only)