Details

---

BUY RECTIFIER BRIDGE KBU1010 10A 1000V DIP-4 https://www.utsource.net/itm/p/12606002.html

Parameter	Value	Unit
Maximum Repetitive Peak Reverse Voltage (VRRM)	1000	V
Maximum Average Rectified Output Current (IO)	10	A
Maximum RMS Current (IRMS)	7.07	A
Peak Non-Repetitive Surge Current (IFSM)	300	A
Junction Operating Temperature Range (TJ)	-55 to +150	°C
Storage Temperature Range (TSTG)	-65 to +150	°C
Forward Voltage Drop (VF) at IF = 10A	1.1	V
Reverse Leakage Current (IR) at VR = 800V, TJ = 25°C	500	μA
Package Type	DIP-4	-

Instructions for Use:

1. Mounting:

   • Ensure that the rectifier bridge is mounted on a heatsink if continuous operation at high current levels is required.
   • Use thermal compound between the rectifier and the heatsink to improve heat dissipation.

2. Electrical Connections:

   • Connect the AC input to the two diagonal terminals (typically marked as ~ or AC).
   • Connect the positive output to the terminal marked with a + symbol.
   • Connect the negative output to the terminal marked with a - symbol.

3. Handling:

   • Handle the rectifier bridge with care to avoid damage to the leads or the package.
   • Avoid exposure to excessive mechanical stress, moisture, or corrosive environments.

4. Thermal Management:

   • Monitor the junction temperature to ensure it remains within the specified range.
   • If the device is operating near its maximum current rating, ensure adequate cooling to prevent overheating.

5. Surge Current:

   • The device can handle short surge currents up to 300A, but ensure these surges are non-repetitive to avoid damaging the rectifier.

6. Storage:

   • Store the rectifier bridge in a dry, cool place away from direct sunlight and sources of heat.

7. Testing:

   • Before installing the rectifier bridge in a circuit, test its parameters using a multimeter to ensure it meets the specified values.

8. Compliance:

   • Ensure that the rectifier bridge complies with all relevant safety and regulatory standards for your application.

(For reference only)