Details

---

BUY PIC18F66K22-I/PT https://www.utsource.net/itm/p/12606017.html

Parameter	Description	Value/Range
Package Type	Package style	44-Pin TQFP (PT)
Operating Voltage (VDD)	Supply voltage range	1.8V to 3.6V
Temperature Range	Operating temperature range	-40掳C to +85掳C
Flash Program Memory	Size	Up to 64KB (32K x 16)
EEPROM Data Memory	Size	2048 bytes
RAM Data Memory	Size	2048 bytes
Clock Speed	Maximum speed	Up to 64 MHz (using PLL)
ADC Channels	Number of Analog-to-Digital Converter channels	13 channels
DAC Channels	Number of Digital-to-Analog Converter channels	2 channels
Timers	Number and type	Three 16-bit timers
Comparator Modules	Number	4
Capture/Compare/PWM	Modules	5 CCP modules
USART Modules	Number	2
SPI/I2C Modules	Number	2
CAN Module	Support	Yes
USB Module	Support	No
Brown-out Reset	Feature	Yes
Low-Voltage Programming	Feature	Yes

Instructions for Use

1. Power Supply Configuration:

   • Ensure the operating voltage is within the specified range (1.8V to 3.6V).
   • Connect decoupling capacitors close to the VDD and VSS pins to stabilize the power supply.

2. Clock Configuration:

   • Configure the internal oscillator or external crystal/clock source as per application requirements.
   • Utilize the Phase-Locked Loop (PLL) for higher clock speeds if necessary.

3. Programming:

   • Use a PIC programmer that supports the PIC18F66K22-I/PT.
   • Follow MPLAB X IDE guidelines for code development and debugging.

4. Peripheral Setup:

   • Initialize ADC, DAC, timers, comparators, and communication modules according to the datasheet.
   • Configure interrupt settings for peripherals as required.

5. Reset and Brown-out Protection:

   • Enable brown-out reset in software if using low-voltage applications.
   • Ensure proper reset circuitry for reliable operation.

6. Environmental Considerations:

   • Operate within the specified temperature range (-40掳C to +85掳C).
   • Protect against electrostatic discharge (ESD) during handling and installation.

7. Pin Configuration:

   • Refer to the pin diagram in the datasheet for correct pin assignments.
   • Avoid exceeding maximum ratings on any pin to prevent damage.

For detailed specifications and advanced configurations, refer to the official Microchip PIC18F66K22-I/PT datasheet.

(For reference only)